Treatment is done with a Zemits DioPulse. It is a diode laser. A pulse of light is absorbed by the melanin in the hair and turns into heat at the follicle. Only follicles in the growing phase respond, which is why a course is spaced out rather than done in one visit.
Zemits lists three wavelengths on this model, and says which job each one is for. 755 nm is for fine, light hair and Fitzpatrick skin types I–III, at a superficial depth. 808 nm is for medium to coarse hair and skin types I–V. 1064 nm is for dense, dark hair and skin types IV–VI, at a deeper level.
Zemits also states the DioPulse is for Fitzpatrick types I–VI, and that the device is MHRA registered. A course is still required, and the result varies from person to person. We patch-test every new client. White and grey hair has very little melanin for these wavelengths to see. If that is your hair, we say so at the test.
The handpiece is the TRioWave, with Zemits’ DiSapphire tip. Cooling is a closed water loop plus thermoelectric cooling in the tip. The technical specification lists the contact temperature as 0–3°C. The tip sits on the skin so the surface stays cool while the follicle is heated. Most people feel a brief warm snap. Sensitive areas feel sharper.
Zemits states the output at 1600 W, with a 12 × 20 mm spot, energy from 2 to 120 J/cm², and pulses from 1 to 10 per second. That is what makes a larger area, such as a back or a pair of legs, a practical appointment rather than an afternoon.
- Type
- Diode laser
- Model
- Zemits DioPulse
- Wavelengths
- 755 nm, 808 nm, 1064 nm
- Power
- 1600 W
- Spot size
- 12 × 20 mm
- Energy
- 2–120 J/cm²
- Pulse rate
- 1–10 Hz
- Pulse duration
- 3–300 ms
- Cooling
- Water loop, DiSapphire tip at 0–3°C
- Screen
- 15-inch touch screen
- Skin types
- Fitzpatrick I–VI, per Zemits
Source: Zemits DioPulse product page. Wavelengths, power and skin-type guide as Zemits states them for this model. Spot size, energy, pulse and the 0–3°C tip temperature from the technical specification.